Subsurface Monitoring Requires Strict Design Thresholds

wave imagewave image
4D seismic monitoring of reservoir depletion, often assisted by enhanced recovery processes, relies upon the acquisition geometry being as close to identical as possible for all surveys used in the time lapse.
  • Particular attention is given to how differences in position and depth of sources and receivers will translate into 4D signal errors
  • The survey design is tailored to the likely thresholds achievable by the acquisition system
  • Multisensor acquisition, source steering, streamer steering, and overlap streamers are best-practice for 4D

If all source and receiver positions are close to equal, differences in the recorded seismic wavefields due to non-repeated acquisition geometry will be negligible.

Furthermore, insensitivity to local changes in receiver depth and/or sea-surface height between surveys will minimize non-repeatable time-shift differences. This is  achievable with multisensor-on-multisensor 4D acquisition (see comparison below).

4D processing and characterization provide the best chance of extracting high-fidelity 4D seismic signals that can resolve subtle changes in reservoir saturation and pressure, and fluid movements can be accurately understood.

Hydrophone-oriented 4D processing (upper) is highly sensitive to small time shift errors introduced by local receiver depth errors and sea-surface height in both the 4D baseline and 4D monitor surveys. The significantly better delineation of small time shifts associated with reservoir fluid movements is achieved in the (lower) panel because of multisensor-oriented 4D processing with ghost-free datasets.

An elastic seismic modeling exercise will determine preferred thresholds for errors in source and receiver position repeatability. This is typically conducted by the operators of an asset and calibrated with reservoir-simulation platforms to history matching of measured well performance. The technical specifications of the available acquisition platforms will also guide the modeling of acquisition parameter sensitivity vs. the ability to detect very small changes in seismic wavelet amplitude phase and/or timing.

In practice, the use of dense streamer spreads (e.g. 50 m streamer spacing) with additional overlap streamers used to contribute data when streamer feathering creates holes in offset classes (see illustration below), is recommended to optimize the data available for 4D binning and data matching. When available, both source and receiver steering will minimize errors in positioning and repeatability (real crossline error plot below).

Overlap shooting ensures repeatable receiver positions in the presence of feathering.

4D monitor survey shot positions color-coded by the crossline source position error from the 4D baseline shot positions.

Contact a PGS expert

If you have a question related to our Marine Acquisition services or would like to request a quotation, please get in touch.